Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (HVAC Systems (Service Information)) >> Controls >> Sensor-Ambient Air Temperature >> Removal

Sensor-Ambient Air Temperature: Removal

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ambient Temperature Sensor
GC0028316Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the grille. Refer to REMOVAL .
  3. Disconnect the wire harness connector (1) from the ambient air temperature sensor (2) located at the top of the front bumper beam (3).
  4. Disengage the ambient air temperature sensor from the retaining tabs (4) and remove the sensor.
scientia non olet · About Mike's Workshop Manuals