Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (HVAC Systems (Service Information)) >> Controls >> Relay-A/C Clutch >> Installation

Relay-A/C Clutch: Installation

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: A/C Clutch Relay
GC0028314Courtesy of CHRYSLER LLC
NOTE: LHD gasoline model shown. Diesel and RHD models similar.
  1. Position the A/C clutch relay (2) into the receptacle of the power distribution center (PDC) (1).
    NOTE: Refer to the fuse and relay layout map on the inside of the PDC cover for A/C clutch relay location.
  2. Align the A/C clutch relay terminals with the terminal cavities in the PDC receptacle and push down firmly on the relay until the terminals are fully seated.
  3. Close the cover of the PDC.
  4. Reconnect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals