Structural Cover: Removal
WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - BOLT |
| 2 - BOLT |
| 3 - BOLT |
- Raise vehicle on hoist.
- Remove the left hand exhaust pipe from exhaust manifold.
- Loosen the right hand exhaust manifold-to-exhaust pipe retaining bolts.
- Remove the eight bolts (1,2,3) retaining structural cover in the sequence shown.
- Pivot the exhaust pipe downward and remove the structural cover.