Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Overhead Console (Service Information)) >> Sensor-Ambient Air Temperature >> Installation

Sensor-Ambient Air Temperature: Installation

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the ambient temperature sensor in the vehicle.
  2. Secure the ambient temperature sensor into the retaining bracket.
  3. Connect the wire harness connector to the ambient temperature sensor.
  4. Install the grille, (Refer to BODY/EXTERIOR/GRILLE - INSTALLATION) .
  5. Connect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals