Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (5.7L Engine (Service Information)) >> Engine Mounting >> Mount-Rear >> Installation >> 4X4

Engine Mounting: Mount-Rear: Installation: 4X4

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Rear Mount (4X4)
GC0027234Courtesy of CHRYSLER LLC
  1. Position the transmission mount (1) on the transmission. Install the bolts (2) that attach the transmission mount to the transmission.
  2. Tighten the bolts to 30 N.m (22 ft. lbs.).
  3. Install the crossmember.
scientia non olet · About Mike's Workshop Manuals