Sensor-Engine Coolant Temperature: Removal: 4.7L
WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - ECT SENSOR |
| 2 - MOUNTING BOLTS (2) |
| 3 - MAP SENSOR |
| 4 - INTAKE MANIFOLD |
WARNING:
Hot, pressurized coolant can cause injury by scalding. Cooling system must be partially drained before removing the engine coolant temperature (ECT) sensor.
The ECT sensor is located near the front of the intake manifold.
- Partially drain cooling system. See STANDARD PROCEDURE .
- Disconnect electrical connector from ECT sensor.
- Remove sensor from intake manifold.