Heater-Engine Block: Installation: 4.7L
WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - ENGINE BLOCK HEATER |
- Thoroughly clean cylinder block core hole and block heater seat.
- Insert block heater assembly with element loop pointing at twelve o'clock.
- With block heater fully seated, tighten center bolt to 2 N.m (17 in. lbs.).
- Refill cooling system. See STANDARD PROCEDURE .
- Start and warm the engine. Check for leaks.