Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (3.7L Engine (Service Information)) >> Engine Block >> Damper-Vibration >> Removal

Engine Block: Damper-Vibration: Removal

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Crankshaft Damper
GC0011805Courtesy of CHRYSLER LLC
  1. Disconnect the negative cable from battery.
  2. Remove the radiator fan. Refer to REMOVAL .
  3. Remove accessory drive belt. Refer to REMOVAL .
  4. Remove the vibration damper bolt.
  5. Remove damper using the Crankshaft Insert 8513A (1) and Three Jaw Puller 1026 (2).
scientia non olet · About Mike's Workshop Manuals