Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Cruise Control Systems) >> Reservoir-Vacuum >> Installation

Section 10 (Cruise Control Systems): Reservoir-Vacuum: Installation

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Speed Control Components
GC0029467Courtesy of DAIMLERCHRYSLER CORP.
1 - Air Cleaner Box
2 - Vacuum Line
3 - Speed Control Servo
4 - Cross Support
5 - Electrical. Connector
6 - Servo Mounting Bracket
7 - Servo Mounting Bolt
8 - Vacuum Reservoir Mounting Bolt
9 - Vacuum Reservoir
  1. Position reservoir (9) to air filter housing.
  2. Install and tighten mounting bolt (8).
  3. Connect vacuum line (2) to reservoir fitting.