Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.7L Engine (Service Information) >> Pump-Engine Oil >> Assembly

Pump-Engine Oil: Assembly

  1. Wash all parts in a suitable solvent and inspect carefully for damage or wear.
  2. Install inner and outer rotors
  3. Install oil pump cover plate and install cover bolts and tighten them to 12 N.m (105 in. lbs.).
  4. Prime oil pump before installation by filling rotor cavity with engine oil.
  5. If oil pressure is low and pump is within specifications, inspect for worn engine bearings or other causes for oil pressure loss.
scientia non olet · About Mike's Workshop Manuals