Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System (Service Information) >> Switch-Seat >> Installation

Power Seat System (Service Information): Switch-Seat: Installation

  1. Position the power seat switch on the seat cushion side panel. Gently apply pressure to the switch until the four mounting tabs that secure the switch snap into place.
  2. Connect the power seat switch electrical connector.
  3. Install the seat cushion side panel on the seat.
  4. Connect the battery negative cable.
  5. Verify normal operation of the power seat assembly.
scientia non olet · About Mike's Workshop Manuals