Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2006 >> Commander 65th Anniversary Edition, 4.7 N, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Electronic Control Modules (Service Information)) >> MODULE, Glow Plug >> Removal >> Removal

MODULE, Glow Plug: Removal: Removal

WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
    Fig 1: Sprinter Glow Plug Module
    GC0079980Courtesy of CHRYSLER LLC
  2. Disconnect the battery positive harness connector (3) from the glow plug module.
  3. Disconnect the glow plug harness connector (4).
  4. Remove the two glow plug module bolts (2).
  5. Remove the glow plug module (1).
scientia non olet · About Mike's Workshop Manuals