Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2005 >> Liberty Limited, 2.8 5, Part Time >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System & Automatic Transmission Cooling System >> Engine >> Engine Coolant Temperature Sensor >> Installation >> 2.8L Diesel Engine

2.8L Diesel Engine

  1. Install coolant temperature sensor in thermostat housing. See Figure.
  2. Connect coolant temperature sensor electrical connector.
  3. Refill cooling system. (Refer to COOLANT  )
  4. Connect negative battery cable.
scientia non olet · About Mike's Workshop Manuals