Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2004 >> Wrangler SE, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Powertrain Diagnostic Procedures >> DRIVEABILITY - Gas >> DTC P0125: Closed Loop Temp Not Reached >> When Monitored and Set Condition:

When Monitored and Set Condition:

P0125-CLOSED LOOP TEMP NOT REACHED 

When Monitored: With battery voltage greater than 10.4 volts, after engine is started, for ten minutes.

Set Condition: The engine temperature does not go above 18 deg. F after the engine has been running for 10 minutes. Two trips are required to set this DTC.

scientia non olet · About Mike's Workshop Manuals