Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Power Door Lock System) >> Door Lock/Unlock Switch >> Installation

Door Lock/Unlock Switch: Installation

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the switch into place.
  2. Connect the electrical harness connector to the switch.
  3. Install the door trim panel (Refer to BODY/DOOR - FRONT/TRIM PANEL - INSTALLATION ).
  4. Connect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals