Tailgate/Flip-Up Glass Power Release System

WARNING: This page is about a different car, the 2002 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

A power operated tailgate/flip-up glass release system is standard factory installed equipment on this model. The entire system is controlled by the BCM. The tailgate/flip-up glass power release system allows the flip-up glass latch to be released electrically by actuating a switch located integral to the outside tailgate handle. By pulling the handle to the first detent or turning the key cylinder to unlock, the flip-up glass will open. Pulling the handle to the second detent will allow the tailgate to open. The tailgate/flip-up glass release system operates with non-switched battery current supplied through a fuse in the JB so that the system remains functional, regardless of the ignition switch position. However, the BCM prevents the flip-up glass latch from being actuated when the tailgate latch is locked. The tailgate will lock and can not be unlocked if the rear wiper switch is activated. The tailgate will also lock if battery power is lost and then restored. The tailgate/flip-up glass will not function with the battery discharged or disconnected.