Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Power Liftgate System) >> Latch - Cables >> Installation

Latch - Cables: Installation

WARNING: This page is about a different car, the 2004 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cable and attach it to the latch.
  2. Connect the cable to the control assembly and secure the retainer clips.
  3. Attach the support clips if equipped.
  4. Install the latch. (Refer to LATCH/GUIDE PLATE  )
  5. Adjust the cables. (Refer to ADJUSTMENTS  )
scientia non olet · About Mike's Workshop Manuals