Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2004 >> Grand Cherokee Overland, AWD >> Repair and Diagnosis >> Steering >> Steering Linkage >> Steering System Linkage >> Drag Link >> Removal

Drag Link: Removal

  1. Raise and support the vehicle.
  2. Remove right wheel and tire assembly.
  3. Remove the cotter pins and nuts at the right steering knuckle and pitman arm (Fig 1 ).
  4. Remove the drag link from the steering knuckle and pitman arm Puller C-3894-A.
  5. Loosen adjustment sleeve clamp bolts and unscrew the tie rod ends from the adjustment sleeve.
    Fig 1: Drag Link
    G03583936Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About Mike's Workshop Manuals