Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2004 >> Grand Cherokee Overland, AWD >> Repair and Diagnosis >> Steering >> Steering Linkage >> Steering System Linkage >> Damper >> Installation

Steering System Linkage: Damper: Installation

  1. Install the steering damper to the axle bracket and tie rod.
  2. Install the steering damper bolt in the axle bracket and tighten bolt to 88 N.m (65 ft. lbs.).
  3. Install the nut at the tie rod and tighten to 41 N.m (30 ft. lbs.).
scientia non olet · About Mike's Workshop Manuals