Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2003 >> Wrangler SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - Self-Diagnostics) >> Self-Diagnostic System >> Clearing Diagnostic Trouble Codes >> Using Scan Tool

Using Scan Tool

WARNING: This page is about a different car, the 2003 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Connect scan tool to Data Link Connector (DLC). DLC is located below left side of instrument panel. See Figure. Turn ignition on. Using screen prompts on scan tool, clear DTCs from PCM.

scientia non olet · About Mike's Workshop Manuals