Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2003 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Power Door Lock System & Remote Keyless Entry System) >> Remote Keyless Entry Transmitter >> Standard Procedure >> Standard Procedure - RKE Transmitter Customer Preferences >> Optical Chirp (Flash) Disabling/Enabling

Optical Chirp (Flash) Disabling/Enabling

WARNING: This page is about a different car, the 2004 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

The optical chirp can be toggled using a DRB III(R) or by using the Remote Keyless Entry (RKE) transmitter.

To DISABLE (cancel) the optical chirp feature, press and hold the transmitter LOCK button for four to ten seconds. While pressing the LOCK button in, press the TAILGATE RELEASE button. Release both buttons.

To ENABLE the optical chirp feature, repeat the above procedure.

scientia non olet · About Mike's Workshop Manuals