Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2003 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Power Door Lock System & Remote Keyless Entry System) >> Door Lock/Unlock Switch >> Installation

Door Lock/Unlock Switch: Installation

WARNING: This page is about a different car, the 2004 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the switch into place.
  2. Connect the electrical harness connector to the switch.
  3. Install the door trim panel. See FRONT DOOR TRIM PANEL  .
  4. Connect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals