Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2002 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Torque Specifications >> Wrangler

Torque Specifications: Wrangler

TORQUE SPECIFICATIONS (WRANGLER)

Application Ft. Lbs. (N.m)
Distributor Hold-Down Bolt (2.5L) 17 (23)
Fuel Pump Module Lock Nut 55 (74)
Fuel Tank Mounting Strap Bolts (1)
Fuel Tank Skid Plate 12 (16)
Heated Oxygen Sensor 22 (30)
Ignition Coil Rail 21 (29)
Intake Air Temperature Sensor 20 (28)
Oil Pump Drive Hold-Down Bolt (4.0L) 17 (23)
Park/Neutral Switch 25 (34)
Power Steering Pressure Switch (2.5L) 10-16 (14-22)
Spark Plug 26-30 (35-41)
INCH Lbs. (N.m) 
Accelerator Pedal Bracket Nut 75 (8.5)
Camshaft Position Sensor Bolts (4.0L) 18 (2.0)
Crankshaft Position Sensor Bolts/Nuts
One-Bolt Mounting 62 (7.0)
2-Bolt Or Nut Mounting 106 (12.0)
Engine Coolant Temperature Sensor 97 (11.0)
Fuel Rail Bolts 71-124 (8.0-14.0)
Idle Air Control Motor 62 (7.0)
Manifold Absolute Pressure Sensor 27 (3.0)
PCM Mounting Bolts 35 (4.0)
Throttle Body Bolts 97 (11.0)
TP Sensor Bolt 62 (7.0)
Vehicle Speed Sensor Bolt 20 (2.3)
(1) Tighten tank strap nuts until length of strap bolt between end of strap bolt and bottom of nut is 1.0-1.3" (28-32 mm). Do not overtighten nuts.