Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 1998 >> Cherokee Limited, 2.5 P >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Controls - Tests W/Codes) >> Verification Tests >> Test VER-1A >> Final Procedure

Final Procedure

WARNING: This page is about a different car, the 1999 Dodge Pickup and 1999 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change engine oil and filter as necessary. Attempt to start engine.
  2. If engine does not start, check for Technical Service Bulletins (TSBs) that apply to vehicle and return to TEST NS-1A: QUALIFYING NO START CONDITION  if necessary. If engine starts, repair is complete. Go to next step.
  3. Turn ignition on, with engine off. Using scan tool, erase DTCs. Turn ignition off. Disconnect scan tool. Test is complete.
scientia non olet · About Mike's Workshop Manuals