Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 1998 >> Cherokee Classic, 2.5 P >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Self-Diagnostics >> Test TC-15B: Speed Control Solenoid Circuits Or Speed Control Power Relay Circuits

Test TC-15B: Speed Control Solenoid Circuits Or Speed Control Power Relay Circuits

NOTE: Perform TEST TC-15A  before proceeding. For connector terminal identification, see CONNECTOR IDENTIFICATION  . To identify referenced circuits and terminals, see WIRING DIAGRAMS  .
  1. Turn ignition off. Using an external ohmmeter, check resistance of S/C brake switch output circuit (Dark Blue/Red wire) between brakelight switch connector and S/C servo connector. If resistance is more than 5 ohms, repair open switched S/C brake switch output circuit and perform TEST SC-VER  . If resistance is 5 ohms or less, go to next step.
  2. Check brakelight switch adjustment. Adjust brakelight switch as necessary and perform TEST SC-VER  . If brakelight switch is adjusted properly, replace brakelight switch and perform TEST SC-VER  .
scientia non olet · About Mike's Workshop Manuals