Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 1996 >> Cherokee Classic, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Alternator & Regulator) >> Self-Diagnostic System >> Entering On-Board Diagnostics >> Erasing Trouble Codes Using Scan Tool

Erasing Trouble Codes Using Scan Tool

WARNING: This page is about a different car, the 1995 Chrysler New Yorker and 1995 Chrysler LHS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Record all trouble codes before erasing. Press ATM key. At scan tool display, press "2" (ERASE) key. Scan tool will display ERASE TROUBLE CODES ARE YOU SURE? (ENTER TO ERASE). Press ENTER key to erase all trouble codes.
  2. When scan tool is finished erasing trouble codes, it will display TROUBLE CODES ERASED. This display will remain until ATM key is pressed. After ATM key is pressed, display will return to CHARGING MENU screen.
NOTE: For more information on PCM diagnostic capabilities and using scan tool, see TESTS W/CODES - BODY CONTROL COMPUTER article in the ENGINE PERFORMANCE section.
scientia non olet · About Mike's Workshop Manuals