Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 1995 >> Wrangler S, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Body Control Computer >> Self-Diagnostic Tests >> Test 3A - No Chimes At All

Test 3A - No Chimes At All

CAUTION: Always turn ignition off prior to disconnecting or connecting any module connector.
NOTE: Perform TEST VER-1B  after each repair.

Ensure all doors are closed. Turn ignition on, engine off. Using scan tool, actuate chime test. If chime does not sound, replace body control module. If chime sounds, turn ignition off. Chime system is okay at this time.

scientia non olet · About Mike's Workshop Manuals