Test Dr-34A - Intermittent ASD Sense Circuit Fault
- Turn ignition on. Using DRB-II, erase fault codes and select ACTUATE ASD RELAY. Using DRB-II, select SECONDARY INDICATORS. Observe secondary indicators while wiggling wires and connectors of ASD relay circuit. If ASD fault returns, repair harness or connector where wiggling caused fault indicator to return. Perform VERIFICATION TEST VER-2 .
- If ASD fault does not return, visually inspect related harness connectors. Look for broken, bent, pushed-out, or corroded terminals. Visually inspect related harnesses. Look for chafed, pierced, or partially broken wires. Repair wiring and/or connectors as necessary. Test is complete. Perform VERIFICATION TEST VER-2 .