Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 1990 >> Wrangler Laredo, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - CARBURETED >> Ignition Coil Test >> Primary Winding Resistance Test

Primary Winding Resistance Test

  1. Remove the connectors from the positive and negative terminals of ignition coil. Set ohmmeter to low scale and zero pointer.
  2. Connect ohmmeter to coil negative and positive terminals. Resistance should be 1.13-1.23 ohms at 75°F (24°C). If coil temperature is above 200°F (93°C), 1.5 ohms is acceptable.
scientia non olet · About Mike's Workshop Manuals