Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 1988 >> Cherokee Limited, 2D Utility >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering General Servicing >> Lubrication >> Refilling & Bleeding System

Refilling & Bleeding System

  1. Fill reservoir to correct level. See RECOMMENDED FLUID  table. Operate engine until fluid reaches normal operating temperature. Stop engine. Add fluid (if necessary). Turn wheels to full left position. Add fluid to reservoir to fill to "FULL-COLD" mark on dipstick.
  2. Start and operate engine at fast idle. Recheck reservoir level. Add to "FULL-COLD" mark on dipstick. Turn wheels from side to side without contacting stops. Maintain fluid level just above pump body.
  3. When air is removed, return wheels to straight-ahead position. Operate engine 2-3 minutes. Stop engine. Road test vehicle. Recheck fluid level. Level should be at "FULL-HOT" position after system has stabilized. Add fluid (if necessary). DO NOT  overfill.
RECOMMENDED FLUID

Application Part Number
Jeep 8993342
scientia non olet · About Mike's Workshop Manuals