Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 1987 >> Cherokee Limited >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Correct Power Source >> Cherokee, Comanche & Wagoneer

Cherokee, Comanche & Wagoneer

  1. With ignition switch and control switch "OFF", all test lights should be off. If any light is on, check that Brown (7) wire is not connected directly to source of voltage.
  2. Also check for bad control switch. With ignition switch in "OFF" position, and control switch "ON". Light No. 2 should be on and lights No. 1, 3, 4, 5 and 6 should be off.
  3. If light No. 2 is off, check speed sensor continuity, check speed sensor terminals to Gray and Dk. Blue wires, and check that terminals No. 2, 3, 5 and 7 (Gray, Dk. Blue and Lt. Green wires are not grounded).
scientia non olet · About Mike's Workshop Manuals