Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 1984 >> Cherokee Base, 2D Utility, 2.5 U, AX4 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustment >> Low-Reverse (Rear) Band

Low-Reverse (Rear) Band

  1. Raise vehicle, drain transmission fluid and remove oil pan. Locate adjusting screw on rear servo lever. Loosen adjusting screw lock nut and back off about 5 turns.
  2. Tighten screw to 41 INCH lbs. (4.6 N.m) and back off indicated number of turns. See LOW-REVERSE (REAR) BAND ADJUSTMENT  . Hold adjusting screw in position and tighten lock nut to 35 ft. lbs. (48 N.m). Install oil pan and fill transmission with fluid.
    LOW-REVERSE (REAR) BAND ADJUSTMENT

    Application Back Off Screw
    Model 727 2 Turns
    Model 904 7 Turns
    Model 999 4 Turns
scientia non olet · About Mike's Workshop Manuals