Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jaguar >> 2021 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Climate Control -- F-Pace/X761) >> Climate Control (G2272401) >> Removal And Installation >> Climate Control Module (G2807084) >> Installation

Climate Control Module (G2807084): Installation

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the climate control module.
    • Install and tighten the 2 bolts.

      Torque  : 1.3 Nm 

    • Connect the 4 electrical connectors.
    • Install the new duct.

      Renew Part: Air duct Quantity: 1 . 

    • Reposition the climate control sensor into the correct position.
    • Install and tighten the screw.

      Torque  : 3.5 Nm 

    • Install the trim.
    • Install the 2 studs.
    • Connect the electrical connector.
    • Install the 3 clips.
  1. Connect the 12 V system.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .

  2. If a new component has been installed, use Jaguar Land Rover (JLR) approved diagnostic equipment to configure. SRO 858002 HVAC Control Module - Update - Replace ECU to be claimed separately.