Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jaguar >> 2021 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Speed Control -- F-Pace/X761) >> Speed Control (G1817310) >> Removal And Installation >> Image Processing Module (G2501624) >> Installation

Image Processing Module (G2501624): Installation

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Make sure that the component is correctly located.

    Install the camera.

  2. Connect the electrical connector.
    • Position the cover.
    • Connect the electrical connector.
    • Install the cover.
  4. Install the interior rear view mirror.

    Refer to: INTERIOR REAR VIEW MIRROR

  5. If a new component has been installed, configure using Jaguar approved diagnostic equipment.

    General Equipment: Jaguar diagnostic equipment 

scientia non olet · About Mike's Workshop Manuals