Inspection and Verification
- Verify the customer concern.
- Visually inspect for obvious signs of damage and system integrity.Visual Inspection
Mechanical Electrical - Engine oil level
- Cooling system coolant level
- Fuel level
- Fuel contamination/grade/quality
- Throttle body
- Poly-vee belt
- Fuses
- Wiring harness
- Electrical connector(s)
- Sensor(s)
- Engine Control Module (ECM)
- Transmission Control Module (TCM)
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
- If the cause is not visually evident, verify the customer concern and refer to the Symptom Chart below, alternatively, check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index .