Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jaguar >> 2007 >> XK8 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Pedestrian Protection System >> Pedestrian Protection System >> Pedestrian Protection Module - Removal and Installation >> Removal

Pedestrian Protection Module - Removal and Installation: Removal

NOTE: The pedestrian protection module must be renewed if the system has deployed on 3 occasions.
  1. Make the pedestrian protection system safe.
  2. Remove the front LH fender splash shield. Refer to Fender Splash Shield article.
    GJ0009561Courtesy of JAGUAR CARS, INC.
  3. Remove the pedestrian protection module.
    • Remove and discard the 2 Torx bolts.
    • Disconnect the electrical connector.
scientia non olet · About Mike's Workshop Manuals