Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jaguar >> 2007 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (MULTIFUNCTION Electronic Modules) >> Multifunction Electronic Modules >> Driver Seat Module (DSM) - Removal and Installation >> Installation

Driver Seat Module (DSM) - Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat control module.
    • Connect the electrical connectors.
    • Tighten the Torx bolts to 10 Nm (7 lb.ft).
  2. Install the front seat. Refer to Front Seat article.
scientia non olet · About Mike's Workshop Manuals