Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jaguar >> 2004 >> XKR 2D Convertible >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission/Transaxle External Controls >> Automatic Transmission/Transaxle External Controls >> Selector Lever Indicator Assembly - Removal and Installation >> Removal

Selector Lever Indicator Assembly - Removal and Installation: Removal

  1. Remove the floor console. Refer to Instrument Panel and Console article.
    GJ0002463Courtesy of JAGUAR CARS, INC.
  2. Disconnect the drive to fifth switch electrical connector.
  3. Remove the transmission selector lever knob. Refer to Transmission Selector Lever Knob - Removal and Installation .
    GJ0002464Courtesy of JAGUAR CARS, INC.
  4. Remove the transmission selector lever knob locking collar.
    GJ0002465Courtesy of JAGUAR CARS, INC.
  5. Disconnect the selector lever indicator assembly electrical connector.
    GJ0002466Courtesy of JAGUAR CARS, INC.
  6. Remove the selector lever indicator assembly.
scientia non olet · About Mike's Workshop Manuals