Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jaguar >> 2003 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Servicing) >> Disassembly/Assembly Of Subassemblies >> Input Shaft Seal >> Installation

Input Shaft Seal: Installation

WARNING: This page is about a different car, the 2005 Jaguar XJR, 2005 Jaguar XJ8, 2004 Jaguar XJR, and 2004 Jaguar XJ8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, install a new input shaft seal.
    Fig 1: Installing Input Shaft Seal
    G00382657Courtesy of JAGUAR CARS, INC.
    2. WARNING: Do not let the torque converter drop out of the transmission. Failure to follow this instruction may result in personal injury.
    NOTE: The torque converter hub must engage fully in the oil pump drive gear.
  2. Using the special tools, install the torque converter. See Figure.
  3. Install the transmission assembly. See REMOVAL & INSTALLATION .
scientia non olet · About Mike's Workshop Manuals