Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jaguar >> 2003 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Electronic Engine Controls) >> Electronic Engine Controls >> Oil Temperature Sensor - Removal and Installation >> Installation

Oil Temperature Sensor - Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Jaguar XKR, 2006 Jaguar XK8, 2005 Jaguar XKR, 2005 Jaguar XK8, and 2004 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
GJ0002303Courtesy of JAGUAR CARS, INC.
    NOTE: Apply a small bead of sealant meeting Jaguar specification to the first three threads of the oil temperature sensor.
  1. Install the oil temperature sensor.
    • Tighten to 15 Nm.
    GJ0002302Courtesy of JAGUAR CARS, INC.
  2. Connect the oil temperature sensor electrical connector.
    GJ0002301Courtesy of JAGUAR CARS, INC.
  3. Install the generator lower cooling duct.
    • Tighten to 2 Nm.
  4. Lower the vehicle.
  5. Check and, if necessary, top up the engine oil.
scientia non olet · About Mike's Workshop Manuals