Speed Control Module Alignment - VIN Range: H18680->H99999

Special Service Tools 

Fig 1: Identifying Special Service Tools

Courtesy of JAGUAR CARS, INC.

1. Remove the radiator splash shield. Refer to RADIATOR SPLASH SHIELD .
NOTE: Make sure the vehicle is positioned on level ground such as the headlamp alignment area.
2. Level the vehicle ride height. For additional information, refer to the Jaguar approved diagnostic system.
3. Using the special tool, check the speed control module vertical leveling.
   Fig 2: Checking Speed Control Module Vertical Leveling

   Courtesy of JAGUAR CARS, INC.
4. Level the speed control module.
   • Rotate the speed control module leveling bolt to achieve a reading of 90 degrees ± 0.75°.
     Fig 3: Rotating Speed Control Module Levelling Bolt

     Courtesy of JAGUAR CARS, INC.
5. Using the special tool, check the speed control module vertical leveling.
   Fig 4: Checking Speed Control Module Vertical Leveling

   Courtesy of JAGUAR CARS, INC.
6. Carry out the speed control module calibration procedure. For further information, refer to the Jaguar approved diagnostic system.
7. Install the radiator splash shield. Refer to RADIATOR SPLASH SHIELD .