Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jaguar >> 2003 >> XJ8 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Speed Control (2003.5-09) >> Removal and Installation >> Speed Control Module >> Removal

Speed Control Module: Removal

    CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
    NOTE: Make sure the audio unit keycode is available before disconnecting the battery ground cable.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY DISCONNECT .
  2. Remove the driver side instrument panel lower trim.
    Fig 1: Removing Driver Side Instrument Panel Lower Trim
    G03555581Courtesy of JAGUAR CARS, INC.
  3. Remove the instrument panel trim.
    Fig 2: Removing Instrument Panel Trim
    G03555582Courtesy of JAGUAR CARS, INC.
  4. Disconnect the speed control module electrical connector.
    Fig 3: Disconnecting Speed Control Module Electrical Connector
    G03555583Courtesy of JAGUAR CARS, INC.
  5. Remove the speed control module.
    • Remove the speed control module retaining nuts.
      Fig 4: Removing Speed Control Module Retaining Nuts
      G03555584Courtesy of JAGUAR CARS, INC.