Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jaguar >> 2000 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Electronic Engine Controls) >> Removal And Installation >> Engine Coolant Temperature (ECT) Sensor >> Installation

Engine Coolant Temperature (ECT) Sensor: Installation

WARNING: This page is about a different car, the 2002 Jaguar XKR and 2002 Jaguar XK8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fitting is the reverse of the removal procedure, noting that a new sealing washer should be used and tighten the sensor as specified.
    • Fit the sensor and new sealing washer. (1)
    • Connect the harness plug to the sensor. (2)
    Fig 1: Installing Engine Coolant Temperature Sensor
    G03157724Courtesy of JAGUAR CARS, INC.
  2. Check and adjust the coolant level as required.
scientia non olet · About Mike's Workshop Manuals