Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jaguar >> 1998 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Electronic Engine Controls) >> Removal & Installation >> Engine Control Module (ECM) (18.30.01) >> Removal

Engine Control Module (ECM) (18.30.01): Removal

WARNING: This page is about a different car, the 1998 Jaguar XK8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery ground cable (IMPORTANT, see for further information).
  2. Remove ECM housing cover.
    Fig 1: Removing ECM Housing Cover
    G04355140
  3. RHD only: Remove security bracket securing screws.
    • Remove bracket.
  4. Disconnect electrical connectors.
  5. Lift ECM from housing.
    Fig 2: Lifting ECM From Housing
    G04355141
  6. RHD only: Remove security bracket securing screws.
    • Remove brackets.
scientia non olet · About Mike's Workshop Manuals