Common Specs & Procedures
(XJS) COMMON SPECS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM SPECIFICATIONS | ||
| Torque | N/A | ||
| Axle Nut/Hub Nut | 108-116 Ft. Lbs. (147-157 N.m) | ||
| Battery | |||
| 4.0L | CAPACITIES | ||
| 6.0L | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | |||
| With ABS | N/A | ||
| Without ABS | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | |||
| Service Specifications | DISC BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | 120 Amps | ||
| Torque | N/A | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Drive Belt Routing | N/A | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 15 psi | ||
| Thermostat R & I | N/A | ||
| Water Pump R & I | |||
| 4.0L | WATER PUMP | ||
| 6.0L | WATER PUMP | ||
| Engine Mechanical | |||
| 4.0L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | Oil pressure at idle should be 30 psi (2.1 kg/cm2 ) minimum. Oil pressure at 4000 RPM should be 70 psi (4.9 kg/cm2 ) minimum. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 6.0L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine at normal operating temperature, oil pressure should be a minimum 7.3 psi (0.5 bar) at idle, and 58 psi (4.0 bar) at 4000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel-To-Crankshaft Bolts | |||
| 4.0L | 91-110 Ft. Lbs. (123-149 N.m) | ||
| 6.0L | 91-110 Ft. Lbs. (123-149 N.m) | ||
| Drive Plate-To-Crankshaft Bolts | |||
| 4.0L | 70-77 Ft. Lbs. (95-105 N.m) | ||
| 6.0L | 63-77 Ft. Lbs. (85-105 N.m) | ||
| Fuel System | |||
| 4.0L | |||
| Pressure Specification | FUEL PUMP | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Filter Location | N/A | ||
| Fuel Filter R & I | N/A | ||
| 6.0L | |||
| Pressure Specification | FUEL PUMP | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Filter Location | N/A | ||
| Fuel Filter R & I | N/A | ||
| Ignition | |||
| 4.0L | |||
| Firing Order & Cylinder Identification | FIRING ORDER | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | FIRING ORDER | ||
| 6.0L | |||
| Firing Order & Cylinder Identification | FIRING ORDER | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | FIRING ORDER | ||
| Spark Plug | |||
| 4.0L | SPARK PLUGS | ||
| 6.0L | SPARK PLUGS | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque Specifications | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 65 Ft. Lbs. (88 N.m) | ||