Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2008 >> Ascender LS, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.2L - DTC P0013 To DTC P0365 >> DTC P0117 or P0118 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the ECT Sensor parameter. The reading should be between -39 to +120°C (-38 to +248°F).
  2. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About Mike's Workshop Manuals