Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2007 >> i-370 4D Pickup, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.7L - Introduction (2 Of 2) >> Repair Instructions >> Mass Airflow Sensor/Intake Air Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of MAF/IAT Sensor
    GM1352006Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
  2. Remove the 2 screws securing the MAF/IAT sensor to the air cleaner assembly.
  3. Remove the MAF/IAT sensor from the air cleaner assembly.
scientia non olet · About Mike's Workshop Manuals