Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.9L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Rail Assembly Replacement >> Disassembly Procedure

Disassembly Procedure

    Fig 1: Removal Of Fuel Injector Harness Clips
    GM1770711Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector harness clips from the fuel rail and remove the harness (1).
  2. Remove the fuel injector retainers (2).
  3. Remove the fuel injectors (4).
  4. Remove the fuel injector upper O-ring seals (5) from the injectors.
scientia non olet · About Mike's Workshop Manuals