Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Radio Speaker Amplifier Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Radio Speaker Amplifier
    GM692030Courtesy of GENERAL MOTORS CORP.
  1. Install the radio speaker amplifier to the body.
    2. NOTE: Refer to Fastener Notice .
  2. Install the 4 bolts that retain the radio speaker amplifier to the body.

    Tighten:  Tighten the bolts to 10 N.m (88 lb in).

  3. Connect the electrical connectors to the radio speaker amplifier.
  4. Install the lower right quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side .
  5. Install the upper right quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement (TrailBlazer, Envoy) .
scientia non olet · About Mike's Workshop Manuals