Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Radio Antenna Cable Extension Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating IP Support Bar Cable Attachments
    GM718022Courtesy of GENERAL MOTORS CORP.
  1. Position the radio extension cable to the I/P support bars as previously noted.
  2. Reach through the I/P compartment to connect the antenna cable to the radio.
  3. Install the radio extension cable attachments (1) to the I/P support bars.
  4. Fig 2: View Of Radio Antenna Cable To Radio Extension Cable
    GM734416Courtesy of GENERAL MOTORS CORP.
  5. Connect the antenna cable (2) to the radio extension cable.
  6. Install the inflatable restraint module. Refer to Inflatable Restraint Instrument Panel Module Replacement .